YCV Series Hyper Pressure Grinder
Hyper Pressure V Type Grinder is new type high efficiency grinding mill designed by EMCC engineer combining clients requirement and practical situation.
Online ServiceAdvantage
- Star rack and V type grinding roller
- centrifugal force is transformed to grinding force grinding roller parallel transmit around vertical axis to press grinding ring to guarantee the max surface contact of grinding roller and grinding ring capacity is improved by 30%。
- Classifier is available
- According to fineness requirement bladed classifier (80-325 mesh) and cage classifier (200-1250 mesh) are available。
- Spacer protective measures
- Main machine is under protection easy to be replaced and maintenance costs is reduced
- Grinding device
- Grinding roller and grinding ring get wear uniformly and lengthen the using lifetime.
Medium fine type：
| Model | Ring Diameter ×Height (mm) | Max.Feeding Size (mm) | Final Size (mesh) | Capacity (t/h) | Speed of Main Mill(r/min) | Main frame Power (KW) | Dimension (L×W×H) (mm) |
| YCV(O)95-S3 | 950×180 | < 25 | 30-425 | 2.7-7.3 | 132 | 37 | 7100×5900×7900 |
| YCV(O)130-S4 | 1280×210 | < 30 | 30-425 | 4.8-15 | 105 | 75 | 7850×8000×9700 |
| YCV(O)160-S4-Ⅱ | 1600×270 | < 35 | 30-425 | 8.5-28 | 90 | 132-160 | 10050×9380×9238 |
Ultrafine type：
| Model | Ring Diameter ×Height (mm) | Max.Feeding Size (mm) | Final Size (mesh) | Capacity (t/h) | Speed of Main Mill (r/min) | Main frame Power (KW) | Dimension (L×W×H) (mm) |
| YCVX(O)95-S3 | 950×180 | < 20 | 200-800 | 0.6-5.5 | 132 | 37 | 7100×5900×7900 |
| YCVX(O)130-S4 | 1280×230 | < 30 | 200-600 | 2.1-11 | 105 | 75 | 7850×8000×9700 |
| YCVXO160-S4-Ⅱ | 1600×290 | < 35 | 200-600 | 4-18 | 90 | 132-160 | 10500×9380×9238 |
| YCVXO190-S4-Ⅱ | 1900×330 | < 45 | 80-600 | 6-43 | 72 | 200-220 | 11700×10800×9300 |
Specification and Enhanced type：
| Model | Ring Diameter ×Height (mm) | Max.Feeding Size (mm) | Final Size (mesh) | Capacity (t/h) | Speed of Main Mill(r/min) | Main frame Power (KW) | Dimension (L×W×H) (mm) |
| YCVXO130-QS4 | 1280×240 | < 30 | 80-600 | 3-20 | 105 | 90 | 7850×8000×9700 |
| YCVXO160-QS4 | 1600×290 | < 30 | 80-600 | 5-30 | 90 | 132-160 | 8800×8300×10300 |
| YCVXO175-QS4 | 1750×330 | < 35 | 80-600 | 6-38 | 84 | 160-200 | 10300×9300×10800 |
| YCVXO190-QS4 | 1900×330 | < 35 | 80-600 | 7-48 | 72 | 200-250 | 11700×9800×11300 |
| YCVXO220-QS4 | 2200×380 | < 45 | 80-600 | 9.5-75 | 66 | 315-400 | 13020×9220×13470 |
Note: capacity in the table is deduced with the standard of limestone as raw material sieving rate is assumed to be 80%
Hyper Pressure V Type Grinder is new type high efficiency grinding mill designed by EMCC engineer combining clients’ requirement and practical situation. Compared with traditional high pressure trapezium mill and high pressure overhang roll mill in the market, it has many advantages. Hyper Pressure V Type Grinder is widely applied in glass, rubber, farm chemical, enamel, oil paint, phosphatic fertilizer and papermaking industry and it could process material whose Moh’s hardness is less than 9.3, moisture is less than 6%, such as talc, barite, calcite, limestone, manganese ore, iron ore, quartz stone and bentonite.
After reducing driving force of the main motor by the gear reducer when the drive center axis and the quincunx rack fixed on the center axis revolve under the centrifugal force the roller revolves around the center axis at the same time parallel swing around the shaft making the roller compress out side to the ring thus ensure that the roller and ring has maximum surface contact. At the same time the roller self revolves around the roller shaft making the material scooped up by the shovel blade to grind after grinding the powder blew to upper part of the mainframe then separating by the separator too coarse powder drops to the grinding room to re-grind the qualified powder airflows into the cyclone powder collector through the discharging pipe is qualified product.
Case
Lots of production lines designed by EMCC have been put into use in many countries. And, what’s most important is some have already become the classical in the local place.
View All →
Contact Us
We Shanghai Exceed Industry Co., ltd is a high-tech Mining machinery enterprise.In the past 20 years, we devote to producing mining equipments, sand making machines and industrial grinding mills.Till now, our products are sold to 75 countries, being the popular equipments in global crushing and grinding industry.
Room 20C, Yindong Mansion, No. 58
Xinjinqiao Road, Pudong, Shanghai, China
david@emccgroup.net
0086-13671863359
+0086-021-58819379
Send us a message
Dear customer, please leave us your contact details and we will contact you to give you a satisfactory solution.
